Number of Items found: 131

TWG Leslie Bearing Set

Leslie bearings are packed in grease that dries out over time resulting in noisy operation. They should rotate smoothly without any noise. It is most likely the bearings in your Leslie are original equipment. Replacing them is a good maintenance procedure and will not be required again for many years. Squeaking, rattlling noises or a wobbling lower rotor are indications that the bearings or grommets have exceeded their useful life.

The small bearing replaces the upper rotor idler wheel bearing used to maintain tension on the horn drive belt. The two larger bearings (Leslie part number 051045) replace the ones used in the lower rotor upper and lower mounting brackets. The lower rotor bearings include Trek II LBG-1 grommet inserts. Not for use with Styrofoam rotors.

Item Description Status Ship Weight List Price Your Price Quantity Gurney BRG TWG Leslie Bearing Set Stocked 0.3 $41.45 $17.00

Leslie Bearing Grommet

This is the grommet used in the lower rotor bearings as well as in the idler spring assembly of many Leslie models. Sold individually.

Item Description Status Ship Weight List Price Your Price Quantity Gurney LBG Leslie Bearing Grommet Stocked 0.1 $1.25 $1.25

Leslie Lower Rotor Mount Grommets - Pair

New grommets for original wooden Leslie lower rotor. Replaces original part number 513-2/051326. Applicable to all the single speed Leslie from the 1940s through 1964, as well as all dual speed, vacuum tube models from 1964 on. Also works with many solid state models like the 760 and 770. Replaces non-pliable, cracked units that no longer hold the shaft securely. Sold in pairs. Order 10 or more pairs and receive a 10% discount on this item.

Item Description Status Ship Weight List Price Your Price Quantity Gurney GRM-RTR Leslie Lower Rotor Mount Grommets - Pair Stocked 0.1 $2.75 $2.75

Hamptone Motor Speed Control Unit

Dual speed capability from single speed motors. Will work with Trek II EIS solid state relays, but hard/soft braking functionality is disabled.

The Hamptone Motor Speed Control unit allows single speed Leslie fast motors to operate in chorale mode by switching the power on and off to the motor at precise intervals to achieve chorale speed. Power is not interrupted when current is flowing through the motors to insure quiet operation (no switching noise is inserted into the amplification circuitry). The choral speed is selectable via DIP switches on the unit. For information on our current price for this item click

Item Description Status Ship Weight List Price Your Price Quantity Gurney MK1D Hamptone Motor Speed Control Unit On Order 1.1 $299.00 $299.00

Half Moon Switch - Chorale/Tremolo - 122 Style

New half moon chorale / tremolo switch assembly wired for the Leslie 122 family speaker cabinets. Includes knob and mounting hardware.

Item Description Status Ship Weight List Price Your Price Quantity Gurney CTS-122 Half Moon Switch - Chorale/Tremolo - 122 Style Stocked 1.0 $124.00 $105.00

Half Moon Switch - Chorale/Tremolo - 147 Style

New half moon chorale / tremolo switch assembly wired for the Leslie 147 family speaker cabinets. Also for the 251 family and 25, 110, 120 and 125 speaker cabinets. Includes knob and mounting hardware.

Item Description Status Ship Weight List Price Your Price Quantity Gurney CTS-147 Half Moon Switch - Chorale/Tremolo - 147 Style Stocked 1.0 $124.00 $105.00

Half Moon Switch - Chorale/Off/Tremolo

New half moon Chorale/Off/Tremolo switch - three position. Includes knob and mounting hardware. Works with all solid state Leslie cabinets as well as tube Leslie cabinets that have been converted to 3 speed switching with the EIS solid state relay system.

Item Description Status Ship Weight List Price Your Price Quantity Gurney COT Half Moon Switch - Chorale/Off/Tremolo Stocked 1.0 $124.00 $105.00

Half Moon Switch - Main/Ensemble/Echo

New half moon main/ensemble/echo switch - three position. Works with 122 style 4H kits and 147 style 26 kits. May work with others as well. Will not work with Leslie 251 style 8253 kits. Includes knob and mounting hardware.

Item Description Status Ship Weight List Price Your Price Quantity Gurney MEE Half Moon Switch - Main/Ensemble/Echo Stocked 1.0 $124.00 $105.00

Half Moon Switch Case - Chorale/Tremolo

New half moon chorale/tremolo switch case only. Includes mounting screws. Knob and internal hardware should be salvaged from original unit or are available separately. Useful when your old case shatters going through the doorway.

Item Description Status Ship Weight List Price Your Price Quantity Gurney CTCASE Half Moon Switch Case - Chorale/Tremolo Stocked 1.0 $74.00 $74.00

Half Moon Switch Case - Chorale/Off/Tremolo

New half moon chorale/off/tremolo switch case only. Includes mounting screws. Knob and internal hardware should be salvaged from original unit or are available separately. Useful when your old case shatters going through the doorway.

Item Description Status Ship Weight List Price Your Price Quantity Gurney COTCASE Half Moon Switch Case - Chorale/Off/Tremolo Stocked 1.0 $74.00 $74.00

Half Moon Switch Case - Main/Ensemble/Echo

New half moon main/ensemble/echo case only. Includes mounting screws. Knob and internal hardware should be salvaged from original unit or are available separately. Useful when your old case shatters going through the doorway.

Item Description Status Ship Weight List Price Your Price Quantity Gurney MEECASE Half Moon Switch Case - Main/Ensemble/Echo Stocked 1.0 $74.00 $74.00

Leslie Switch - Two Position

New two position switch can be wired for separate or simultaneous Leslie 122 and 147 operation. DPDT switch contacts are rated at .5 Amp/115 VAC or .25 Amp/230VAC.

Item Description Status Ship Weight List Price Your Price Quantity Gurney SW2P Leslie Switch - Two Position Stocked 0.1 $40.00 $40.00

Leslie Switch - Three Position

New three position switch can be wired for separate or simultaneous Leslie 122/147 and 9/11 pin model operation. Switch contacts are rated at .5 Amp/115 VAC or .25 Amp/230VAC.

Item Description Status Ship Weight List Price Your Price Quantity Gurney SW3P Leslie Switch - Three Position Stocked 0.1 $40.00 $40.00

Brown Half Moon Switch Knob

Reproduction brown console switch knob. Avoid injury to your fingers and palm with one of these in place.

Item Description Status Ship Weight List Price Your Price Quantity Gurney BR-KNB Brown Half Moon Switch Knob Stocked 0.1 $8.25 $8.25

Black Half Moon Switch Knob

NOS black console switch knob. Avoid injury to your fingers and palm with one of these in place. Very limited quantity available.

Item Description Status Ship Weight List Price Your Price Quantity Gurney BLK-KNB Black Half Moon Switch Knob Stocked 0.1 $11.00 $11.00

Half Moon Switch - Chorale/Tremolo - Combo

New half moon chorale / tremolo switch assembly wired for both Leslie 122 and 147/251 family speaker cabinets. Switch shown in straight up position to provide a good look at the lettering. Includes knob and mounting hardware.

Item Description Status Ship Weight List Price Your Price Quantity Gurney CTS-COMBO Half Moon Switch - Chorale/Tremolo - Combo Stocked 1.0 $124.00 $105.00

Half Moon Bottom Plate

New half moon switch case bottom cover in standard dark brown color. Includes mounting screws.

Item Description Status Ship Weight List Price Your Price Quantity Gurney HMBOT Half Moon Bottom Plate Stocked 0.1 $12.00 $12.00

Half Moon Switch Support Legs - Pair

L bracket switch supports for all half moon enclosures. Used to secure the switch inside the case assembly. Only needed if they weren`t picked up when the case broke going through the door.

Item Description Status Ship Weight List Price Your Price Quantity Gurney HMLEGS Half Moon Switch Support Legs - Pair Stocked 0.2 $12.00 $8.00

Leslie Wing Nut Set

Set of five wing nuts used to secure the motors and idler assemblies in many Leslie cabinets. Order 10 or more sets and receive a 10% discount on this item.

Item Description Status Ship Weight List Price Your Price Quantity Gurney WING5 Leslie Wing Nut Set Stocked 0.1 $6.00 $6.00

Leslie Wing Nut

Wing nut used to secure Leslie motors and idler assembly.

Item Description Status Ship Weight List Price Your Price Quantity Gurney WING Leslie Wing Nut Stocked 0.1 $2.25 $2.25

Lower Rotor Metal Washer

Metal washer used between the wooden lower rotor and the lower bearing grommet. Used in all 122/147/251 and their family of cabinets.

Item Description Status Ship Weight List Price Your Price Quantity Gurney RTR-WSHR Lower Rotor Metal Washer Stocked 0.1 $1.50 $1.50

Leslie Slow Motor Mounting Screws - Set

Hex head screws used to secure the Leslie slow motor mounting bracket to the Leslie fast motor U bracket. Set of four.

Item Description Status Ship Weight List Price Your Price Quantity Gurney HEX-SCRW Leslie Slow Motor Mounting Screws - Set Stocked 0.1 $2.00 $2.00

Slow Motor Bushings - Pair

Bushings used to mount the bracket to the slow motor. #6 screw size. Sold in pairs. Order 10 or more sets and receive a 10% discount on this item.

Item Description Status Ship Weight List Price Your Price Quantity Gurney BSH6 Slow Motor Bushings - Pair Stocked 0.1 $1.00 $1.00

Fast Motor Bushings - Pair

Bushings used with the fast motor mounting bracket (lower) or Z-brackets (upper). #10 screw size. Sold in pairs. Order 10 or more sets and receive a 10% discount on this item.

Item Description Status Ship Weight List Price Your Price Quantity Gurney BSH10 Fast Motor Bushings - Pair Stocked 0.1 $1.00 $1.00

Replica Leslie Back Panel Screw

Individual back panel machine screw with captive flat washer for Leslie cabinets.

Item Description Status Ship Weight List Price Your Price Quantity Gurney BPS-1 Replica Leslie Back Panel Screw Stocked 0.1 $2.00 $1.50

Replica Leslie Back Panel Screw Set

Set of 13 back panel machine screws with captive flat washer for Leslie cabinets.

Item Description Status Ship Weight List Price Your Price Quantity Gurney BPS-13 Replica Leslie Back Panel Screw Set Stocked 0.4 $26.00 $13.65

Leslie Amplifier Chassis Screw

Screw for securing the front end of most Leslie tube power amplfiers. The amplifier will fall out or strike the lower rotor if the cabinet is moved and this screw is missing. Order 10 or more and receive a 10% discount on this item.

Item Description Status Ship Weight List Price Your Price Quantity Gurney AMP-SCRW Leslie Amplifier Chassis Screw Stocked 0.1 $1.00 $1.00

Leslie Slow Motor Adjustment Screw

Screw Screw used to set the relative position of the slow motor with respect to the fast motor O-ring. Order 10 or more and receive a 10% discount on this item.

Item Description Status Ship Weight List Price Your Price Quantity Gurney SMA-SCRW Leslie Slow Motor Adjustment Screw Stocked 0.1 $0.50 $0.50

Leslie Slow Motor Hardware Kit

Replacement hardware for Leslie slow motors.

Item Description Status Ship Weight List Price Your Price Quantity Gurney SMH Leslie Slow Motor Hardware Kit Stocked 0.1 $2.50 $2.50

Leslie Amplifier Crossover Screw - Pair

Screws for securing the Leslie 122/142/145/147/251/351 crossover to the cabinet.

Item Description Status Ship Weight List Price Your Price Quantity Gurney XO-SCRW Leslie Amplifier Crossover Screw - Pair Stocked 0.1 $2.50 $2.50

Leslie Bass Speaker Screw Set

Set of 8 machine screws for securing the 15" bass speaker in many Leslie speaker cabinets.

Item Description Status Ship Weight List Price Your Price Quantity Gurney SPKR-SCRW Leslie Bass Speaker Screw Set Stocked 0.3 $3.25 $3.25

T-Nut

Used throughout Leslie speaker cabinets: receives and secures speaker and driver screws, back panel screws, motor mount screws, bearing screws and more. 28 used in a standard Leslie 122/147 cabinet. Six prongs for maximum gripping power. Order 10 or more and receive a 10% discount on this item. Sold individually.

Item Description Status Ship Weight List Price Your Price Quantity Gurney TNUT T-Nut Stocked 0.1 $0.50 $0.50

Amphenol Bracket Mounting Screws

Replace those missing, incorrect or damaged screws used to secure Amphenol mounting brackets to your vintage amplifier chassis. Sold in pairs.

Item Description Status Ship Weight List Price Your Price Quantity Gurney AMPH-BSCRW Amphenol Bracket Mounting Screws Stocked 0.1 $1.00 $1.00

Experienced Leslie Amplifier Holding Bracket

Experienced Leslie amplifier mounting bracket for 122/147 and similar amplifiers. Secures the back end of the amplifier to the cabinet. Mounting screws included. Not pretty but functional.

Item Description Status Ship Weight List Price Your Price Quantity Gurney BRKT-AMP Experienced Leslie Amplifier Holding Bracket Stocked 0.2 $5.00 $5.00

Leslie Mounting Grommets - Pair

These are reproductions of the rubber amplifier mount used in numerous Leslie models (122, 147 and many more). Not for Leslie 31H series 1 and 2 amplifers.

Item Description Status Ship Weight List Price Your Price Quantity Gurney AMP-GMT Leslie Mounting Grommets - Pair Stocked 0.1 $5.00 $5.00

Rotating Speaker Motor and Rotor Oil

Oil for vintage Leslie motors and horn rotor bearings. This oil will keep your motors squeak-free and your horn rotor spinning effort-Leslie! Unique metal needle tip makes it possible to oil the motor felts with surgical precision. 30ml bottle comes in three different colors - if you have a preference please let us know in the comment section when ordering (yellow is out of stock - we now have orange though).

Item Description Status Ship Weight List Price Your Price Quantity Gurney RSOIL Rotating Speaker Motor and Rotor Oil Stocked 0.6 $7.00 $7.00

Mercotac Rotary Contact

Rotating electrical connector for use in Leslies with roto-sonic drum speakers. No maintenence, low noise, low resistance electrical connection via liquid metal conduction path. For model 205, 610, 700, 710, X-77 and many others. Original Leslie part number 015941

Item Description Status Ship Weight List Price Your Price Quantity Gurney MERC Mercotac Rotary Contact Stocked 0.2 $46.00 $46.00

Mercotac Rotary Contact Cap

Interface between fixed wires and rotating electrical connector used in Leslies with roto-sonic drum speakers. For model 205, 610, 700, 710, X-77 and many others. Original Leslie part number 015958.

Item Description Status Ship Weight List Price Your Price Quantity Gurney MERC-CAP Mercotac Rotary Contact Cap Stocked 0.2 $9.25 $9.25

Mercotac Socket

Fixed electrical connector for use in Leslies with roto-sonic drum speakers. This is the part inside the rotosonic drum shaft that the spinning Mercotac fits into. For model 205, 610, 700, 710, and many others.

Item Description Status Ship Weight List Price Your Price Quantity Gurney MERC-SKT Mercotac Socket Stocked 0.2 $14.00 $14.00

Combo Preamp Footswitch

Replacement foot switch for Leslie combo preamplifiers and other similar applications. DPDT type rated for 4 amps at 125 volts, 2 amps at 250 volts.

Item Description Status Ship Weight List Price Your Price Quantity Gurney STOMP Combo Preamp Footswitch Stocked 0.1 $10.00 $10.00

Leslie 47/147 Amplifier Load Switch

Three position rotary switch for use as a load switch in Leslie 47 and 147 amplifer chassis.

Item Description Status Ship Weight List Price Your Price Quantity Gurney LOADSW Leslie 47/147 Amplifier Load Switch Stocked 0.2 $10.00 $10.00

Leslie Amplifier Volume Knob

Knob for all Leslie tube amplifier volume controls, and for load switches on the 47/147 amplifiers. Also fits the load control switch on 44W/46W/47/147 amplifiers.

Item Description Status Ship Weight List Price Your Price Quantity Gurney AMP-KNB Leslie Amplifier Volume Knob Stocked 0.2 $4.00 $3.00

Leslie Upper Motor Stack

Experienced dual speed motor stack for Leslie 122/142/145/147/251. Motors are refurbished with new grommets, springs, washers, shims and O ring, cleaned and lubricated. Metal parts are cleaned or replaced with nice looking servicable units. Includes new power cords, wing nuts and wire nuts. Picture is an example of units in stock. 115 VAC only - no 230 VAC units available. Please allow up to three days for shipping.

Item Description Status Ship Weight List Price Your Price Quantity Gurney UMS Leslie Upper Motor Stack Back Ordered 7.0 $322.00 $322.00

Leslie Lower Motor Stack

Experienced dual speed motor stack for Leslie 122/142/145/147/251. Motors are refurbished with new grommets, springs, washers, shims and O ring, cleaned and lubricated. Metal parts are cleaned or replaced with nice looking servicable units. Includes new power cords, wing nuts and wire nuts. Picture is an example of units in stock. 115 VAC only - no 230 VAC units available. Please allow up to three days for shipping.

Item Description Status Ship Weight List Price Your Price Quantity Gurney LMS Leslie Lower Motor Stack Back Ordered 7.0 $322.00 $322.00

Replacement Upper Slow Motor

Replacement 120 VAC 60 Hz motor for vintage dual speed Leslie Speaker cabinets. Attaches to original mounting plate with no modifications. For upper motor stack use only. Please note: the AC leads for this motor are 6 inches long. Not designed to run at 50 Hz.

Item Description Status Ship Weight List Price Your Price Quantity Gurney USL-MTR Replacement Upper Slow Motor Stocked 2.0 $90.00 $85.00

Replacement Lower Slow Motor

Replacement 120 VAC 60 Hz motor for vintage dual speed Leslie Speaker cabinets. Attaches to original mounting plate with no modifications. For lower motor stack use only. Please note: the AC leads for this motor are 6 inches long. Not designed to run at 50 Hz.

Item Description Status Ship Weight List Price Your Price Quantity Gurney LSL-MTR Replacement Lower Slow Motor Stocked 2.0 $90.00 $85.00

Leslie Motor O Rings - Pair

These are reproductions of the rubber O rings used on the fast motors found in numerous dual speed Leslie models (122, 147, 251, 330, 760, 825, 900, and many more). Original Leslie part number 014159.

Item Description Status Ship Weight List Price Your Price Quantity Gurney RING Leslie Motor O Rings - Pair Stocked 0.1 $8.00 $4.00

Leslie Motor O Rings for Decorator Cabinet - Pair

These are reproductions of the rubber O rings used on the fast motors found in Leslie models 222, 247, 351 and others cabinets that used the sidecar arrangement for the treble horn motors.

Item Description Status Ship Weight List Price Your Price Quantity Gurney RINGWF Leslie Motor O Rings for Decorator Cabinet - Pair Stocked 0.3 $9.00 $5.00

Leslie Lower Motor Spring Kit

New spring kits for Leslie lower stack slow motors. The spring insures the slow motor shaft moves away from the fast motor O ring. Failure to do so causes the fast motor to lock or fail to reach the correct tremolo speed.

Item Description Status Ship Weight List Price Your Price Quantity Gurney LSK Leslie Lower Motor Spring Kit Stocked 0.1 $3.75 $3.75

Leslie Lower Motor Spring Kit - Long Spring

New spring kits for Leslie lower stack slow motors. The spring insures the slow motor shaft moves away from the fast motor O ring. Failure to do so causes the fast motor to lock or fail to reach the correct tremolo speed. Longer spring used in some late 1960s and early 1970s motors.

Item Description Status Ship Weight List Price Your Price Quantity Gurney LSK-LONG Leslie Lower Motor Spring Kit - Long Spring Stocked 0.1 $4.50 $4.50

Now viewing: 31 - 80 of 131 items
Prev   1   2   3   Next